GROHE Blue® - Installation video

Unpacking GROHE Blue®

Working steps

Tightening of the t-piece, setting up the water pressure limiter and connecting to the t-piece
Connecting of the water pressure limiter to the angle valve
Installing the kitchen tap on the sink
Fixation of the tap, connecting the flexi hoses to the pipe connections
Cut out the fitting template
Mark out the ventilation opening and the fixing feet
Saw the holes for ventilation opening and fixing feet
Mounting the CO2 bottle holder
Connecting the drinking water hoses to the chiller
Water connection from chiller to kitchen tap
Connect the 6V tab control cable and 230V power cable tap to the chiller
Position the chiller in the pre-prepared fixing holes
Water connection from water pressure limiter to filterhead
Connecting of the blue drinking water hose to the filter head, locking with the red clamp
Screwing of the filter into the filterhead
Open corner valves, connect the 230V power cable to the plug socket (afterwards the chiller will automatically fill with water)
Screw the adapter to the CO2 bottle (small adapter for 425gr, big adapter for 2kg CO2-bottles)
Connect the CO2-hose (red) to the CO2-pressure limiter, locking with the red clamp
Connect the CO2-pressure limiter with the CO2-bottle, open valve (only for 2kg bottle)
Fixing of the CO2 bottle at the chiller
Measure the water hardness, set-up the level of water hardness according to the installation guide at the filter head and chiller
How to pour the different water types: still/chilled, medium sparkling/ chilled, full sparkling/ chilled